Offer
Other Specialized Services
Porous materials testing
Physical gas adsorption
Porosity analysis of materials using physical adsorption
Physical adsorption of gases, such as nitrogen, at low temperatures enables the evaluation of surface and structural properties of materials, including pore size and volume, as well as specific surface area.
Physical sorption analyzer 3Flex (Micromeritics)
Mercury porosimetry
Porosity analysis of materials using mercury porosimetry
Mercury porosimetry involves analyzing material porosity by forcing mercury into pores under high pressure. It enables precise determination of pore size distribution, pore volume, and density, which is essential for evaluating materials used in filtration, catalysis, and energy storage.
Mercury porosimeter AutoPore IV 9510 (Micromeritics)
Density measurement
True density analysis of solid materials
This method is used for precise measurement of the true density of solid materials and powders, using helium flow as a gas penetrating micropores. Due to its high accuracy and non-destructive nature, it is widely applied in the analysis of porous materials, ceramics, and composites.
Helium pycnometer AccuPyc 1340 (Micromeritics)
Surface and particle size analysis
Surface tension measurement
Surface tension measurement of liquids
An optical goniometer uses droplet shape analysis to determine the contact angle, enabling the assessment of surface hydrophilicity or hydrophobicity.
Tensiometer DCAT11 (DataPhysics Instrument)
Contact angle measurement
Contact
An optical goniometer uses droplet shape analysis to determine the contact angle, enabling the assessment of surface hydrophilicity or hydrophobicity.
Optical goniometer OCA35 (DataPhysics Instrument)
Particle size and zeta potential measurement (DLS analysis)
True density analysis of solid materials
The dynamic light scattering (DLS) method allows precise measurement of particle size distribution and zeta potential of particles suspended in liquid.
Helium pycnometer AccuPyc 1340 (Micromeritics)
Electrical properties testing
A system for measuring resistivity and carrier mobility using the Hall effect, HMS 8407 (LakeShore Cryotronics). It is ideal for measuring temperature-dependent resistivity and mobility from 1 to 10⁶ cm²/V·s. An optional AC measurement mode is available, extending mobility measurement down to 10⁻³ cm²/V·s.
The maximum field strength for DC current is up to 2.25 T (8407) and for AC current up to 1.31 T (8407). Measurements can be performed in the standard resistance range of 0.5 mΩ to 10 MΩ. The high-resistance option extends the range up to 200 GΩ. The low-resistance option significantly reduces resistance noise levels. The device operates across a wide temperature range from 15 K to 1273 K. All measurements may be conducted at room temperature, elevated temperature (up to 1273 K), or reduced temperature (from 15 K).
Basic services:
- Measurement of carrier mobility, carrier type, and concentration
- Measurement of resistivity and the Hall coefficient
- Hall voltage measurements
Price list:
- The price for 1 hour of basic analyses on the equipment: 227 PLN/hour. More complex analyses will be priced individually.
- An additional fee of 150 PLN should be added for preparing a summary report.
Aparat HMS 8407 (LakeShore Cryotronics)
Thermal treatment of samples
High-temperature furnace annealing of samples, e.g., for sintering or other purposes.
High-temperature furnaces
Annealing in drying ovens (air, vacuum) up to 300°C
Laboratory dryers
Histology
Preparation of tissue material samples
Microtome, tissue processor, cryostat
Processor for staining and sealing specimens with film
Training in selected research techniques
We invite you to contact us:
- laboratoria@port.lukasiewicz.gov.pl
- +48 510 131 925
- 147 Stabłowicka Street, 54-066 Wrocław
Porous materials testing
Physical gas adsorption
Porosity analysis of materials using physical adsorption
Physical adsorption of gases, such as nitrogen, at low temperatures enables the evaluation of surface and structural properties of materials, including pore size and volume, as well as specific surface area.
Physical sorption analyzer 3Flex (Micromeritics)
Density measurement
True density analysis of solid materials
This method is used for precise measurement of the true density of solid materials and powders, using helium flow as a gas penetrating micropores. Due to its high accuracy and non-destructive nature, it is widely applied in the analysis of porous materials, ceramics, and composites.
Helium pycnometer AccuPyc 1340 (Micromeritics)
Surface and particle size analysis
Surface tension measurement
Surface tension measurement of liquids
An optical goniometer uses droplet shape analysis to determine the contact angle, enabling the assessment of surface hydrophilicity or hydrophobicity.
Tensiometer DCAT11 (DataPhysics Instrument)
Contact angle measurement
Contact
An optical goniometer uses droplet shape analysis to determine the contact angle, enabling the assessment of surface hydrophilicity or hydrophobicity.
Optical goniometer OCA35 (DataPhysics Instrument)
Particle size and zeta potential measurement (DLS analysis)
True density analysis of solid materials
The dynamic light scattering (DLS) method allows precise measurement of particle size distribution and zeta potential of particles suspended in liquid.
Helium pycnometer AccuPyc 1340 (Micromeritics)
Electrical properties testing
A system for measuring resistivity and carrier mobility using the Hall effect, HMS 8407 (LakeShore Cryotronics). It is ideal for measuring temperature-dependent resistivity and mobility from 1 to 10⁶ cm²/V·s. An optional AC measurement mode is available, extending mobility measurement down to 10⁻³ cm²/V·s.
The maximum field strength for DC current is up to 2.25 T (8407) and for AC current up to 1.31 T (8407). Measurements can be performed in the standard resistance range of 0.5 mΩ to 10 MΩ. The high-resistance option extends the range up to 200 GΩ. The low-resistance option significantly reduces resistance noise levels. The device operates across a wide temperature range from 15 K to 1273 K. All measurements may be conducted at room temperature, elevated temperature (up to 1273 K), or reduced temperature (from 15 K).
Basic services:
- Measurement of carrier mobility, carrier type, and concentration
- Measurement of resistivity and the Hall coefficient
- Hall voltage measurements
Price list:
- The price for 1 hour of basic analyses on the equipment: 227 PLN/hour. More complex analyses will be priced individually.
- An additional fee of 150 PLN should be added for preparing a summary report.
Aparat HMS 8407 (LakeShore Cryotronics)
Thermal treatment of samples
High-temperature furnace annealing of samples, e.g., for sintering or other purposes.
High-temperature furnaces
Annealing in drying ovens (air, vacuum) up to 300°C
Laboratory dryers
Training in selected research techniques
We invite you to contact us:
- laboratoria@port.lukasiewicz.gov.pl
- +48 510 131 925
- 147 Stabłowicka Street, 54-066 Wrocław
Do you have a question?
Contact us
Looking for reliable laboratory analyses or customized solutions tailored to your needs? Our experts are ready to answer your questions and advise you on the best options. Contact us today!
- laboratoria@port.lukasiewicz.gov.pl
- +48 510 131 925
- 147 Stabłowicka Street, 54-066 Wrocław
Want to know more?
Fill out a short contact form so we can reach out to you and provide details about our services.
This is the first step toward establishing cooperation and tailoring our services to your needs. We look forward to hearing from you.